40L efficient agriculture UAV X11Max
Product Introduction
The X11Max UAV is a high-performance multi-rotor aircraft with many advanced technical features suitable for professional flight and photography applications. Here is a brief explanation of some of the key features described:
1. High pull and long endurance: The X11Max's carbon fiber blade is 48 inches in size and is capable of producing a maximum tension of up to 48 kg, which means it can carry heavy loads. At the same time, it is mentioned that the single-axis 20kg force efficiency has an indicator of 7.8kg/w, which indicates that its energy efficiency is very high, thus achieving a long endurance time.
2. Electromechanical combination: The combination of electrical Modulation (electronic governor) and motor is optimized to support the mutual backup of signals of CAN (Controller Area Network) digital throttle and PWM (Pulse Width Modulation) analog throttle, ensuring the stability and reliability of the signal, especially in complex environments.
3. Fault storage and analysis: the electric modulation has built-in fault storage function, and the fault data is downloaded and viewed through DATALINK, that is, the data box, which makes the fault data and greatly simplifies the fault location and analysis process of the UAV.
4. FOC vector control: Field Oriented Control (FOC) is an advanced Motor control technology that provides more accurate throttle control and makes the throttle response more linear. Compared with Brushless DC motor (Brushless DC Motor) of the same power, FOC achieves 10% higher efficiency. The temperature has dropped by 10°C.
5. Protection design: X11Max adopts full potting inverted design to achieve IPX7 protection level, which can effectively resist pesticides, corrosive substances, dust, sand and so on.
Specifications
Max Thrust |
44kg/rotor |
||
Recommended Takeoff Weight |
20-22kg/Axis |
||
Recommended Battery |
18S |
||
Operating Temperature |
-20~50℃ |
||
Total Weight |
2800g |
||
Ingress Protection |
IPX6 |
||
KV Rating |
60rpm/V |
||
Stator Size |
111*22mm |
||
Powertrain Arm Tube Outer Diameter |
50mm |
||
Bearing |
Bearings imported from Japan |
||
Recommended LiPo Battery |
18S(LiPo) |
||
PWM Input Signal Level |
3.3V/5V |
||
Throttle Signal Frequency |
50-500Hz |
||
Operating Pulse Width |
1050-1950us(Fixed or cannot be Programmed) |
||
Max. Input Voltage |
78.3V |
||
Max. Input Current (Short duration) |
150A(With/ Good Heat Dissipation) |