The first in the industry to integrate pitot tube, airspeed sensor, temperature and humidity sensor, ARM M4 processor, and dual temperature control system into one structure, and has rainproof performance

P8 Module is an ultra-long data transmission module of unmanned system. It adopts the communication frequency band of 840MHz. It has a transmission distance of 60km and a transmission rate of 345Kbps. It supports opoint-to-multiple, and relay communication, meet communication requirements in multiple application scenarios.

The LTE 4G network data transmission and image transmission integrated link developed by CUAV can be connected to the CUAVCloud system and supports CUAV GS Android ground station and FeiGongTransmission. Through FeiGongTransmission, MissionPlanner and QGroundControl can also be used. 1080P HD image transmission, the ideal environment can be as low as 250ms, and the data transmission delay is 60ms.

The LBA 3 micro base station adopts a dustproof, waterproof and corrosion-resistant design, which can be placed outdoors for a long time without fear of wind and sun. It perfectly solves the problem of repeated installation in high-frequency and automated application scenarios, reduces repetitive work, and improves work efficiency

C- RTK 2 is a high-performance PPK/RTK positioning module created by CUAV for professional application fields such as UAV aerial survey; It integrates light appearance, industrial grade IMU, multi-star and multi-frequency satellite receiver, supports both RTK centimeter-level positioning navigation and RAW data recording for post-differential calculation. Supports shutter triggering and hotshoe synchronization. It adopts CAN bus protocol and is compatible with PX4/ArduPilot open-source flight controller. It can be applied to various specifications of multi-rotor, VTOL fixed wing, helicopter and other industrial use UAVs.

The cost-effective digital data telemetry developed by CUAV supports 4G/3G/2G network with network delay as low as 40~20ms.

X7+ autopilot uses STM32H743 series processors CPU, Cortex-M7 core (with double precision Floating-Point Unit). It makes operating frequency increase to 480Mhz, 2MB Flash，1MB RAM，Meet the higher computing needs of flight controllers Compared with the STM32F7 product line, the dynamic power consumption efficiency is doubled.

The V5 nano® is an autopilot designed by the CUAV® and PX4 teams for businesses or enthusiasts who are extremely sensitive to space but want to get the power of V5. Its design is based on the Pixhawk FMUv5 standard and is perfectly compatible with PX4 and ArduPilot firmware.

V5+® is an advanced autopilot designed by CUAV® and the PX4 team and manufactured by CUAV. It is based on the Pixhawk FMUv5 design standard and is perfectly compatible with PX4 and ArduPilot firmware.

• H7 Double-precision floating-point processor
• High-performance ARM M3 coprocessor
• Low noise Car-grade IMUs
• Triple redundant IMUs and dual redundant barometer designs
• Car-grade RM3100 magnetic compass
• New built-in shock absorption design

Using STM32H753IIK6 processor, double precision floating point arithmetic unit (DSP&FPU), the main frequency up to 480MHz; 2M FLASH,1MB RAM; For flight controller to bring powerful computing power, rapid data processing ability, for more functional development and flight stability to provide more possibilities

The Tattu 4.0 14S 20Ah HV 25C 53.2V smart battery, the latest advancement in drone battery technology. Upgraded cells ensure reliability and endurance, it supports 5C fast charging and 180A max continuous discharge current.

The Tattu 3.0 is a new generation smart drone battery with optimized plug & play installation, adopts high energy density cell and advanced BMS, specially designed for a heavy payload of MTOW 25kg to 85kg Drones

The Tattu 3.0 is a new generation smart drone battery with optimized plug & play installation, adopts high energy density cell and advanced BMS, specially designed for a heavy payload of MTOW 25kg to 85kg Drones

The Tattu 3.0 is a new generation smart drone battery with optimized plug & play installation, adopts high energy density cell and advanced BMS, specially designed for a heavy payload of MTOW 25kg to 85kg Drones

The Tattu 3.0 is a new generation smart drone battery with optimized plug & play installation, adopts high energy density cell and advanced BMS, specially designed for a heavy payload of MTOW 25kg to 85kg Drones